Ref.: Muslim, Mazlan, Powering & Resistance Of Fishing Vessel (PROFV), Lambert Academic Publishing, Germany, www.lap-publishing.com, 2014. 

Resistance Transducer:
According to the 23rd  ITTC Resistance Committee, the resistance transducer needs to be calibrated with weights prior to the model test. The weights are the standard for the load cell calibration and are a source of error, which depends on the quality of the standard.
In this research, transducer calibration was done after the model tests, using standard load cells certified by the Malaysian Standard. The calibration is more like a transducer load measurement accuracy verification, and in this case is within 3% from the load cells load. The transducer calibration in the laboratory is done on a monthly basis, but also depends on the number of model tests need to be done.

Comments

Popular posts from this blog

Khasiat Fadhilat (Isnad) Doa Haikal - Majmu' Syarif

Remembrance - Zikr